Fuse Holder 16a Manufacturers

The YRPV-30 1500VDC 10×38mm PV Fuse Holder is specifically designed to provide rapid protection under conditions of overload current associated with Photovoltaic (PV) systems. The recommended fuse link size is 10×38mm, which secures the 1500VDC Photovoltaic (PV) systems. The YRPV-301500VDC 10×38mm PV Fuse is most commonly used in PV combiner boxes, inverters, etc. 1500VDC 30A 10×38mm Solar PV DIN Rail Fuse Holder was made of the flame-retardant shell with V0 standard, and the dead-front design made it possible to match the busbar mounting in the Photovoltaic (PV) system. 10×38mm Photovoltaic Fuse Holder is also available in 1, 2, 3 and 4-pole configurations.

The YRPV-30X 1500VDC 30A 10×38mm Solar PV DIN Rail Fuse Holder with Indicator Light is designed to accommodate 1500VDC10 10×38mm PV Fuse and provides rapid protection against the current overload of the Photovoltaic (PV) systems. The recommended fuse link size is 10×38mm, which secures the 1500VDC Photovoltaic (PV) systems. This YRPV-30X 1500VDC 10×38mm Photovoltaic fuse is most commonly used for photovoltaic PV combiner boxes, inverters, Photovoltaic strings, Photovoltaic array protection, etc. YRPV-30X1500VDC 10×38mm Photovoltaic fuses made of V0 standard flame retardant material can be installed in the Photovoltaic (PV) system systems. YRPV-30X 1500VDC 10×38mm PV Fuse Holder are also available in 1, 2, 3 and 4-pole configurations.

Galaxy Fuse is a leading China 415VAC 92mm Africa J Type Outdoor HRC Fuse Link manufacturers. Galaxy Fuse (Yinrong) brand 415VAC Slotted J Type HRC Fuse Link is highly in demand in the African market. YRJSU are designed with wedge-type carriers on BS applications, such as distribution pillars, open-type substation boards, heavy-duty cut-outs, underground connection boxes and cable protection. This J-type fuse with 92mm slotted fixing centre is available for optional mounting.

Galaxy Fuse is a leading China 500VAC 125A 22×58mm DIN Rail Fuse Holder manufacturers. Galaxy Fuse (Yinrong) brand RT18L-125 22×58mm Fuse Holder is specifically designed to provide fast-acting protection under overload current conditions associated with industrial applications. The recommended fuse link size is 22×58mm, which can safely protect general industrial applications. All circuits up to 690V for protection of motors, transformers, low voltage distribution, control circuits and so on. RT18L-125 22×58mm Fuse Holder was made of the flame-retardant shell with V0 standard, and the dead-front design made it possible to match the busbar mounting. RT18L-125 22×58mm Fuse Holder is also available in 1, 2, 3 and 4-pole configurations.

Galaxy Fuse (Yinrong) YREVu series gEV fuses are specially designed and tested to provide optimum auxiliary protection and high-performance protection in electrical systems and Hybrid Electrical Vehicles, up to 500VDC in amperes from 70-100A. The YREVu-500VDC 100A EV Automotive UPS Fuse Link was specifically built from the ground up to meet the automotive vibration requirements and standards of the electric vehicle industry.

Galaxy Fuse is a leading China 690V 1000A YRSA2-PK High Speed Fuse manufacturers. China high speed semiconductor fuse factory Galaxy Fuse (Yinrong)’s YRSA2-PK gR high speed fuse is specially designed to protect semiconductor devices. YRSA2-PK gR high speed fuse is designed for both overload and short-circuit protection. YRSA2-PK gR high speed fuse provides a wide amperage rating of 400-1000A under the rated voltage of 690V/700VAC (IEC/UL), which can typically fit most semiconductor devices. This YRSA2-PK gR high speed fuse conformed to the nation standard GB13539.4 and the international electrical committee standard IEC60269-4. Besides, it also can be used for short circuit for electric vehicle drive power systems, power conversion systems, energy storage and power batteries, energy storage capacitors, inverter controllers, chargers, wires, automotive devices and other backup protection.