DC Solar Fuse Manufacturers

The YRPV-30S 1500VDC Solar PV Fuse Link is designed to provide rapid protection under conditions of overload current associated with Photovoltaic (PV) systems. This 10x38mm full-size cylindrical fuse secures the 1500VDC Photovoltaic (PV) systems. The 1500VDC 30A 10×38mm Solar PV Fuse Link has multiple ampere ratings ranging from 2A to 30A to help meet the specific requirements of various Photovoltaic (PV) applications, including PV combiner boxes, inverters, and more. As an explorer of Solar Photovoltaic (PV) Fuses in China, Zhejiang Galaxy Fuses Co. Ltd. (Yinrong) insists on using high-quality materials throughout the process to ensure the performance of each fuse.

The YRPV-30X 1500VDC 30A 10×38mm Solar PV DIN Rail Fuse Holder with Indicator Light is designed to accommodate 1500VDC10 10×38mm PV Fuse and provides rapid protection against the current overload of the Photovoltaic (PV) systems. The recommended fuse link size is 10×38mm, which secures the 1500VDC Photovoltaic (PV) systems. This YRPV-30X 1500VDC 10×38mm Photovoltaic fuse is most commonly used for photovoltaic PV combiner boxes, inverters, Photovoltaic strings, Photovoltaic array protection, etc. YRPV-30X1500VDC 10×38mm Photovoltaic fuses made of V0 standard flame retardant material can be installed in the Photovoltaic (PV) system systems. YRPV-30X 1500VDC 10×38mm PV Fuse Holder are also available in 1, 2, 3 and 4-pole configurations.

The YRPV-40 1500VDC 40A 14×51mm Solar PV DIN Rail Fuse Holder is specifically designed to protect and isolate Solar Photovoltaic (PV) strings. The recommended fuse link size is 14×51mm and securely protects the 1500VDC Photovoltaic (PV) systems. The YRPV-40 1500VDC 14×51 mm PV fuse is most commonly used in Photovoltaic PV combiner boxes, inverters, battery charge controllers, etc. YRPV-40 1500VDC 14×51 mm PV Fuse Holder has a shell that meets the V0 flame-retardant standard and has a front-facing design to meet the requirements of the PV system for the busbar installation.

Galaxy Fuse’s (Yinrong) XRNT type high voltage transformer protection current limiting fuses are designed with insert installation, which is convenient for installation and removal. The 12kV 200A XRNT Transformer Protection Current Limiting Fuse is made of high-resistance metal wire and low-resistance metal wire. They are sealed in the fuse tube filled with high-purity quartz sand. The fuse tube is made of heat resistance, high-duty ceramic or epoxy glass. When a fault circuit happens and causes an arc, quartz sand will extinguishes the arc immediately.

Galaxy Fuse is a leading China 500VDC 150A HV Auto EVSE Fuse Link manufacturers. China fuse factory Galaxy Fuse (Yinrong) YREVu series gEV fuses are generally engineered to offer optimum auxiliary protection and high-performance protection in electrical systems and hybrid electrical vehicles, up to 500VDC in amperes from 60-150A. The YREVu-150a was also specifically designed from the ground up to meet the automotive vibration requirements and standards of the electric vehicle industry.

Galaxy Fuse is a leading China 690V 1400A YRSA3-PK High Speed Fuse manufacturers. China high speed semiconductor fuse supplier Galaxy Fuse (Yinrong)’s YRSA3-PK gR high speed fuse is specially designed to protect semiconductor devices. YRSA3-PK gR high speed fuse is designed for both overload and short-circuit protection. YRSA3-PK gR high speed fuse provides a wide amperage rating of 500-1400A under the rated voltage of 690V/700VAC (IEC/UL), which can typically fit most semiconductor devices. This YRSA3-PK gR high speed fuse conformed to the nation standard GB13539.4 and the international electrical committee standard IEC60269-4. Besides, it also can be used for short circuit for electric vehicle drive power systems, power conversion systems, energy storage and power batteries, energy storage capacitors, inverter controllers, chargers, wires, automotive devices and other backup protection.